Harley Davidson Engine Oil Drain Plug Location
Locate the engine oil drain hose near the left rear frame rail below the transmission unit.
Harley davidson engine oil drain plug location. Lube the gasket on a new oil filter with engine oil and install the new filter. All 3 plugs are the same. This drain plug can be used for Harley Davidson engine and transmission plugs from approximately 1980s to present day models.
If you are looking at the oil pan from the primary side of the engine you will see two bolts one looks more like a set screw located towards the center of the oil pan the other which will be closest to you will have a hex head on it for a box end or open end or socket along with a hole in the center for an allen wrenchit is the one closest to the out side towards the frame railHope this helps. Look under left side bottom of Primary and find a rubber hose that is clamped to a metal plug. We now can remove the drain plug and let the oil flow in our drain pan.
You will need to use a T-30 to turn the. Milwaukee eight oil change. Ride the motorcycle until engine is at normal operating temperature.
The engine oil drain plug is a 58 inch hex head plug on the bottom left side of the oil tank case under the spot where the jiffy stand rests in it up position. Remove your oil filter with an oil filter wrench and take your dog for a walk to pass the time until the oil is done draining. Remove your oil filter.
Park on a level surface where the service will be performed. The plug on left front of the oil pan is the engine oil drain. It shows the transmission drain plug as being on the bottom of the pan facing the ground and the oil drain plug as being on the side of the pan facing 9 oclock when viewing the bike from the rear.
Remove filler cap and drain plug. Before you do an oil change run the engine up to operating temperature. It is located on the bottom right side of the oil pan.